Replace broken or worn-out weather stripping around your cargo doors and hatches on your RV before water damage creates a costly headache. This lip seal installs onto a 1/8" thick flange. Flexible core keeps seal in place on rounded corners.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody, Andy here with etrailer.com. And today, we're gonna take a look at this E-Trailer press on rubber hollow bulb seal for RV and trailer doors. With this push on rubber seal, you're going to be able to replace your broken or worn out weather stripping around your cargo doors and hatches on your RV before water damage creates a costly headache. The flexible steel core is going to help this seal maintain its grip and rounded edges, rounded areas rather, and it is completely encased in rubber to prevent rust formation. As you can see right here at the end where this has been trimmed off, you can see that steel core there, but all throughout that is going to be encased in rubber all along there. And this is going to be an easy installation.
You're just going to press this lip seal onto the 1/8th of an inch thick flange on your RV. You may have to use a rubber mallet to tap this seal into place. Then you'll just use scissors to trim off any extra seal that you don't need. This is made here in the USA of EPDM rubber so this is not going to shrink or crack or fade over time. This is also resistant to UV damage.
I'm gonna go ahead and pull out my ruler here and just give you some overall measurements. So measuring this way, as you can see, we are sitting right at about 13/16th of an inch. Measuring this direction here, we're sitting right at about, right at about half an inch. And what I have here on my table is a 15 foot bundle, but we do also carry this in a 25 foot and a 50 foot bundle. So depending on which length you need, you can just take the item number of the length that you are looking for that you see there on your screen and put it in the search field of our website and that will take you to the length that you are in need of.
Well, that's gonna conclude our brief look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.
Although this item didn't fit my application, it is an excellent product and etrailer service was superb as usual.
Product is great, I just wished I would have measured my door first since the 15' wasn't quite long enough. I made due splitting the gap with my old seal. I will eventually re-order and use this seal on one of my smaller doors.
Haven't installed yet, but appears to be a good product
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.